Focused On Marking
April 23, 2012
By Russ Olexa
May 2010 – Product marking applications are often done using dated equipment, such as pantographs, acid etching or other mechanical methods, including a hammer and punches. These methods are slow and laborious, however. Today, for high-volume marking, lasers have pretty much taken over because of their low cost, high efficiency and ability to do just about any type of marking or etching on many kinds of materials, including metal.
One company that has benefited from laser marking is Gables Engineering, Coral Gables, Fla. It produces aircraft control panels for communication, navigation and audio, along with many specialty items, including cabin smoke detectors and weather radar control panels.
These products require some type of marking, which can include numerals, letters or etched artwork on glass for LCD displays.
Craig Kirsch, manager of mechanical and manufacturing engineering, says that at one time, Gables Engineering used a Gorton pantograph machine, which was like a small milling machine, to put information on front panels. But this equipment had drawbacks, such as being slow and limited as to the types of work it could do.
Gables Engineering was started by Victor Clarke, who made control panels in a small storefront in Coral Gables, Fla., in 1946.
With his thorough knowledge of the aviation industry, the company established an international reputation as a source for reliable, custom-engineered control panels, audio systems and related products for aircraft.
Today, Gables Engineering believes in investing in the best technologies and equipment and has developed many proprietary processes.
Additionally, the company is vertically integrated, offering its customers a rapid design-to-production cycle with optimal control quality and delivery.
Sum of its parts
Gables Engineering uses a turret punch press to produce the various holes in sheet metal for equipment such as digital audio systems and radios in its control panels. For other machined areas, it uses milling and turning centers.
“We buy some electrical components, but we also make switches in house,” says Kirsch. “When you’re looking at an aircraft control panel’s faceplate, there’s anywhere from 4 to 8 in. of electronics behind it that are also part of the unit. We make the unit electronics behind it and the faceplate, [which] would generally be a clear piece of acrylic plastic that’s painted white then painted again, either black or gray, over the white. We laser engrave the nomenclature or artwork through the colored paint to the white on the front panel.”
A cockpit display’s basic framework is 1/16-in.-thick coated aluminum (to prevent oxidation) for the front and a piece of painted clear plastic laminate for the faceplate with a 1/32 -in.-thick aluminum cover wrapped around everything.
Kirsch says there might be four 1/4-in. square posts attached at the four corners for the framework of the unit. This gives the control panel a depth of anywhere from 2 in. to 8 in.
“You have a faceplate, a back plate and an aluminum cover that wraps around the sides and top to contain it all,” he says. “We use a lot of aluminum in the basic structure, and then of course you have the electronics and PC boards inside, behind the control panel. But some of the newer front panels are cut out of aluminum plate. Control panels can be made either way.”
Building a panel
Kirsch says that after a control panel has been approved for a particular design for an aircraft, it will have to go through a certification process to make sure it meets all Federal Aviation Administration requirements, along with those of the mainframe manufacturer, such as Boeing or Cessna.
This usually means the panel must meet everything from shock to vibration to flammability requirements, as well as be able to operate properly under all these conditions.
Once the design is approved, the production programs are sent to the various manufacturing areas to produce the parts and make the assemblies. Gables Engineering will build a one-off order or produce hundreds of panels.
Marking faster and easier
After it moved away from the Gorton pantograph, Gables Engineering bought YAG lasers for marking. But Kirsch says this equipment had a great deal of maintenance issues.
“About 15 years ago, we went to a YAG laser that was a lot quicker than the pantograph and did a better job,” he says. “But later we found ourselves spending [thousands of dollars] per year to keep them running. The maintenance costs were getting a little out of hand.”
Gables Engineering was also using a laser from Fonon Technologies, Lake Mary, Fla., for its LCD control panel manufacturing.
“Using their laser, we were scribing lines on the glass where it would be snapped apart,” says Kirsch. “Then when their fiber lasers came out, Fonon Technologies offered us a unique solution to our marking problems.”
Over several years, Gables Engineering bought two Fibersource XPs from Fonon Technologies to mark front panels and two Fibersource XP Pluses to do the artwork on coated glass used to make LCD panels. “We bought one about four years ago, and then a year later, we were so happy with it that we purchased another one,” says Kirsch. “Then, two years later, we bought two more. Not only are they meeting our expectations as far as no maintenance costs, but for the type of work we do, they are giving us a nicer surface when cutting into white paint. The fiber laser gives us a beautiful flat white surface without any etch marks. So we are actually happier with the outcome of the process that it produces.”
Kirsch also says these systems are pretty compact–the base is about 3 ft. by 3 ft., and it stands about 5 ft. tall. In a room that had one YAG laser, Gables Engineering can now fit two fiber lasers.
“We don’t have an X- and Y-axis on our table on our front panel marking lasers, so both the part and the lens are fixed in one area,” he says. “If we had an X- and Y-axis, we would have a larger working area because we could move the part around underneath the lens. Or we could use a different-sized lens with the same laser to get a larger working area. This really works out for us because most of our control panels fall within the laser’s 7-in.-by-7-in. working area.”
Kirsch also says fiber lasers are noted for their tremendous uptime and require little maintenance to keep them running.
“[Fonon Technologies’] equipment has worked out very well for us, and we have developed a valuable relationship with the company,” says Kirsch.
Sources:
Gables Engineering Inc.
Coral Gables, Fla
phone: 305/774-4400
fax: 305/774-4465
www.gableseng.com
Fonon Technologies
Lake Mary, Fla.
phone: 407/829-2613
fax: 407/804-1002
www.laserphotonics.us
Laser Processing in the Tooling Industry
April 19, 2012
The tooling industry has adopted laser processing significantly over the years. Some of the out-dated processes that have been replaced by lasers are chemical etching, dot pin, electro etching and stamping. Lasers are extremely versatile and are capable of annealing, etching and deep engraving. For this reason many companies have chosen laser processing as a necessary tool over the older conventional ways. Fonon Technologies’ systems can be seen in marking hand tools in Cornwell Tools, marking drill bits in Precision Twist Drill and several other tooling companies throughout the world.
Laser Processing in the Semiconductor Industry
April 19, 2012
Laser processing has significant advancements over existing technologies. Fonon Technologies produces industrial grade systems combined with cutting edge laser technology for the semiconductor and flat panel industries. Fonon Technologies’ systems can be seen in LCD manufacturing at ADS Transcoil, ITO removal in windshield manufacturing at PPG Glass, and several other companies in the semiconductor and flat panel industries.
Laser Processing in the Firearm Industry
April 19, 2012
ATF regulations have led the firearms industry to seek laser solutions. With high peak power systems now available, firearm manufactures are able to meet ATF standards while manufacturing 24/7 with zero down time for maintenance or retooling. Fonon Technologies’ Canyon Deep Engraving system was specifically designed to meet the performance demands of the leaders in the firearms industry.
Laser Processing in the Aerospace Industry
April 19, 2012
Laser processing is widely used throughout the aerospace industry. UID compliance has played its part in pushing laser marking, yet the versatility of laser marking has enabled laser processing to meet the strict guidelines which the aerospace industry must comply with. Fonon Technologies’ systems are being used to mark the space shuttle by NASA, ship making by the U.S. Navy, and several other companies within the aerospace industry.
Laser Processing in Job Shops
April 19, 2012
Laser Processing is very important to job shops. They depend on these systems to perform on a high production and single part production basis. Conventional technologies require tooling changes, down time and considerable maintenance. Fiber lasers are able to provide an efficient, affordable and reliable solution that fits their needs. Fonon Technologies’ systems are being used in U.S. Military job shops, overseas job shops and several other companies world-wide.
Laser Processing for the Medical Industry
April 19, 2012
Medical companies are rapidly converting to laser processing technology. Medical regulations and guidelines are easily achievable by the precision and repeatability of lasers. Almost every material used within the medical industry works ideally with laser technology. Fonon Technologies’ systems can be seen in manufacturing lines for blood test strips in Nova Biomedical, marking implants by Smith Nephew, and several other medical manufactures.
Laser Processing for the Automotive Industry
April 19, 2012
Laser processing is widely used throughout the automotive industry. Fonon Technologies has supplied systems for marking pistons, backlit buttons, VIN numbers, brake components, bearings amongst several other automotive applications. Over the years automakers have transitioned from dot pin, electro-etching, stamping and ink jet marking to laser marking. Laser marking has been deemed the preferred method in direct part marking in almost every automotive application.
Laser Processing for Military and Defense Industry
April 19, 2012
Laser processing is used in applications from marking tactical weapons and munitions to cutting armor plate for military vehicles.
Laser Processing for Metal Fabrication
April 19, 2012
Laser processing has become the preferred method of manufacturing within almost all metal fabrication industries. Older processes that are now being replaced by fiber laser processing include stamping, sheering, punching and mechanical saws. Fonon Technologies’ systems can been seen in agricultural manufacturing plants, heavy machinery fabrication, job shops and several other companies in metal fabrication.
Laser Processing & the Packaging Industry
April 19, 2012
Laser processing has only recently started to take hold of the packaging industry. Newer laser technology has finally met the high throughputs that older technology, like ink jet and stamping, had set the standards within automated lines. Laser processing is ideal for the high speeds and repeatability that the packaging industry requires. Fonon Technologies systems can be seen in bottle marking lines, boxes, label making, and other consumable packaging products.
Fiber Laser Ablation/Surface Removal
April 10, 2012
This process is typically used to remove paint, coatings and other surface material to create contrast without damaging the base material. Common applications are automotive dash boards and aircraft displays. Applications include backlit buttons, anodized aluminum and painted surfaces.
Click on image to enlarge
Fiber Laser Etching
April 10, 2012
This process is commonly used to create permanent part marking. Etching is typically a very shallow surface removal to create contrast. Applications range from etching electronics, tools and automotive components.
Click on image to enlarge
Fiber Laser Engraving
April 10, 2012
Fiber Laser engraving is technology based on the same procedural principle, laser-induced ablation through melting and/or evaporation of the substrate. Engraving is a method used to create a durable, direct mark that is forgery-proof and resistant to wear and corrosion.?
By laser engraving, 2D OR 3D dimensional structures can be formed in injection- or forming molds.
Click on image to enlarge
Fiber Laser Annealing
April 10, 2012
Fiber Laser annealing creates a permament mark induced by heat without removing or compromising the material. Annealing is used with all metals containing carbon which shows a color change when exposed to heat, especially stainless steel.?
The annealing process offers significant advantages when marking already finished surfaces. The marking speed is slower compared to engraving because annealing relies solely on thermal effects of bringing the carbon in the steel to the surface.
Click on image to enlarge
Fiber Lasers for Cutting Brass
April 10, 2012
Fiber lasers are ideal for highly reflective metals such as brass. The most common fabrication methods are water jet cutting and stamping. Laser cutting brass eliminates the need for heavy tooling rework and time consuming set up changes. Fiber lasers cut with an extremely high power density and a reduced HAZ (heat affected zone) which makes it possible to laser cut brass while meeting customers’ tolerances and specifications.
Click on image to enlarge
Recommended units: FLC (any model)
Fiber Lasers for Cutting Aluminum
April 10, 2012
Aluminum is widely used in metal fabrication but not exclusively cut by lasers. Aluminum is extremely reflective to conventional CO2 laser technology. Fiber lasers are the answer. Fiber lasers have a shorter wavelength and greater power density. This enables fiber lasers to cut up to 1” aluminum and penetrate a market in which plasma and water jet ruled.
Click on image to enlarge
Recommended units: FLC >2kW
Fiber Lasers for Cutting Stainless Steel
April 10, 2012
Stainless steel is fabricated across almost every industry. Conventional methods include CO2 laser cutting, plasma, water jet, sheering, punching and stamping. Cutting with a Fiber laser can eliminate almost every other method. With the speed of linear motors and the power of a Fiber laser cutting up to 1”, almost every method of fabricating stainless steel becomes obsolete. Although other lasers can cut thick stainless steel, Fiber technology is extremely efficient, reliable and relatively zero maintenance. This positions Fiber laser cutting as the preferred method over conventional technologies.
Click on image below to enlarge
Recommended units: FLC (any model)
Fiber Lasers for Cutting Mild Steel
April 10, 2012
Mild steel is one of the most used metals in fabrication and commonly cut by lasers. CO2 lasers have been the preferred method over plasma and water jet cutting. However, Fiber lasers have technological advancements well beyond that of CO2 lasers and are capable of cutting mild steel with almost half the power.
Click on image below to enlarge
Recommended units: FLC (any model)
Fiber Lasers for Cutting Copper
April 6, 2012
Copper has its own niche market and not many manufactures attempt to use lasers during fabrication. Copper is highly reflective to the wavelength of conventional lasers and will damage the internal optics if used. The most common methods are water jet cutting and stamping. However, Fiber lasers are ideal for this application. With a shorter wavelength, smaller spot size and greater power density, Fiber lasers are perfect for cutting highly reflective materials.
Click on image to enlarge
Recommended units: FLC (any model)